VocoPro DTX-5000G Manuel du propriétaire télécharger pdf (Page 16)

GETTING CONNECTED

Connecting a TV Monitor

If you will be connecting your DTX-5000G to a TV monitor you should use an RCA video cable. On the back of the DTX-5000G, locate

the RCA connector jack labeled VIDEO OUT (there are three). Please note that while all three VIDEO OUTPUT jacks will output decod-

ed video graphics, only VIDEO 2 and VIDEO 3 outputs will contain the on-screen functions display.

Do not use the VIDEO 1 output unless you are using another TV as the monitor for the singer, as this output

bypasses the on-screen functions display to prevent singer distraction.

Connect either end of an RCA video cable to the desired VIDEO OUT jack and connect the other end to the VIDEO INPUT jack on your

TV monitor.

onnecting a Player to the DTX-5000G

For players with a Digital output (required if CD+G graphics are to be decoded and displayed):

(b)

1. If you will be using an optical cable, please switch

the OPT/COAX switch on the rear of the unit to

unit to its OPT position.

NOTE:

There are two digital inputs, and each of them can independently be configured to accommodate either

an optical or a coaxial input.

(c)

For TV monitors using the NTSC standard (including the U.S., Canada, Mexico, Central America and South

America), switch the PAL/NTSC switch on the rear of the unit to the NTSC position. For European TV

monitors, the switch should be set to the PAL position.

NOTE:

NTSC/PAL switch is for the CD+G graphics monitor only. The format of the external video input to the

DTX-5000G VIDEO INPUT jacks will not be changed by the setting of this switch.

(d)

The DTX-5000G is factory set for 120V AC operation only. Plugging the DTX-5000G into a 220V

ower source will severely damage the unit and will void the warranty. (If you live in an area that uses

220V AC outlets, please check with your VocoPro dealer to make sure the unit has been switched

for 220V use).

1- Fiber-optic Digital Cable

1- COAXIAL

(b)

2. If you are using a coaxial cable, set

the switch to COAX.

U.S., Canada, Mexico, Central

America and South America

TV monitors.

European TV Monitors

(

Determine the type of digital cable that you will be

using. We have included an optical cable that can

be used if your player has an optical output. If your

player has a coaxial output, you should use a

standard RCA video cable.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

VocoPro DTX-5000G Manuel du propriétaire Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de karaoké VocoPro DTX-5000G